GSM Software Tool Free Download 100% Tested and Virus Free Tools, Here You can Learn Basic GSM Tips and Tricks.

Breaking

Thursday, January 31, 2019

January 31, 2019

Oppo R11 (CPH1707EX) Stock Firmware Dead Fix Tested Flash File Free 100% Working

Oppo R11 (CPH1707EX) Stock Firmware Dead Fix Tested Flash File Free 100% Working

How To Flash

  1. Launch QFIL
  2. Connect the device to the PC while in EDL Mode (device should be in EDL before connecting to pc). No Port Available should change to Qualcomm HS-USB QDLoader 9008 
  3. Under Select Build Type, tick Flat Build
  4. Under Select Programmer, click Browse
  5. In the Window that pops up, highlight the loader file (usually named prog_emmc_firehose_****.mbn) and click Open
  6. Click Load XML
  7. In the Window that pops up, highlight the rawprogram() file then click Open
  8. Another Window will automatically pop up, highlight the patch() file then click Open
  9. Click Download
  10. QFIL should start flashing the firmware, Do Not interrupt
  11. You should get Download Succeed Finish Download once QFIL has successfully flashed the firmware. Disconnect the device and boot up
Download Link :: Link
January 31, 2019

Oppo R11 Tested Flash File Free 100% Tested

Oppo R11 Tested Flash File Free 100% Tested

How to Install OTA Updates Manually using Recovery and ADB sideload

If there’s one thing that Android devices have had right for a very long time, then it’s the system of Over-The-Air a.k.a OTAupdates. This ensures that a user can get updates for his/her device directly on the phone without needing to connect phone to a PC. This feature was adopted by Apple for its iPhone later than Android.
However, the thing with OTA updates is that not everyone gets them right off. To let it go smooth on download servers, manufacturers roll out OTA updates only gradually to select regions and users and complete it over the course of up to one month. But of course, people like us don’t wait that long.
OTA updates can also be installed manually. Although manufacturers won’t give you this as a direct option, but users who receive the OTA updates often publicly share the .zip file of the update. That file is your ticket to install a OTA update manually.
So if you’ve the .zip file of the OTA update you wish to install, follow the instructions below to install it manually.
  1. Download and transfer the OTA update’s .zip file to your Android device’s internal storage (don’t put it inside any folder).
  2. Boot your device into recovery mode.
  3. └ Once in recovery mode, use Volume buttons to navigate up and down between options and Power button to select an option.
  4. Select the “Apply update” or “Apply update from phone storage” option.
  5. Select the OTA .zip file you transferred in Step 1 above. and install it.
  6. Once installation is finished, select reboot from recovery main menu.
Download Link :: Link
January 31, 2019

Oppo R9 Plus Stock Firmware Dead Fix Tested Flash File Free 100% Working

Oppo R9 Plus Stock Firmware Dead Fix Tested Flash File Free 100% Working

How To Flash

  1. Launch QFIL
  2. Connect the device to the PC while in EDL Mode (device should be in EDL before connecting to pc). No Port Available should change to Qualcomm HS-USB QDLoader 9008 
  3. Under Select Build Type, tick Flat Build
  4. Under Select Programmer, click Browse
  5. In the Window that pops up, highlight the loader file (usually named prog_emmc_firehose_****.mbn) and click Open
  6. Click Load XML
  7. In the Window that pops up, highlight the rawprogram() file then click Open
  8. Another Window will automatically pop up, highlight the patch() file then click Open
  9. Click Download
  10. QFIL should start flashing the firmware, Do Not interrupt
  11. You should get Download Succeed Finish Download once QFIL has successfully flashed the firmware. Disconnect the device and boot up
Download Link :: Link
January 31, 2019

OPPO R7SM Tested Flash File Free 100% Tested

OPPO R7SM Tested Flash File Free 100% Tested



How to Install OTA Updates Manually using Recovery and ADB sideload

If there’s one thing that Android devices have had right for a very long time, then it’s the system of Over-The-Air a.k.a OTAupdates. This ensures that a user can get updates for his/her device directly on the phone without needing to connect phone to a PC. This feature was adopted by Apple for its iPhone later than Android.
However, the thing with OTA updates is that not everyone gets them right off. To let it go smooth on download servers, manufacturers roll out OTA updates only gradually to select regions and users and complete it over the course of up to one month. But of course, people like us don’t wait that long.
OTA updates can also be installed manually. Although manufacturers won’t give you this as a direct option, but users who receive the OTA updates often publicly share the .zip file of the update. That file is your ticket to install a OTA update manually.
So if you’ve the .zip file of the OTA update you wish to install, follow the instructions below to install it manually.
  1. Download and transfer the OTA update’s .zip file to your Android device’s internal storage (don’t put it inside any folder).
  2. Boot your device into recovery mode.
  3. └ Once in recovery mode, use Volume buttons to navigate up and down between options and Power button to select an option.
  4. Select the “Apply update” or “Apply update from phone storage” option.
  5. Select the OTA .zip file you transferred in Step 1 above. and install it.
  6. Once installation is finished, select reboot from recovery main menu.
Download Link :: Link

Wednesday, January 30, 2019

January 30, 2019

Oppo R7s Tested Flash File Free 100% Tested

Oppo R7s Tested Flash File Free 100% Tested


How to Install OTA Updates Manually using Recovery and ADB sideload

If there’s one thing that Android devices have had right for a very long time, then it’s the system of Over-The-Air a.k.a OTAupdates. This ensures that a user can get updates for his/her device directly on the phone without needing to connect phone to a PC. This feature was adopted by Apple for its iPhone later than Android.
However, the thing with OTA updates is that not everyone gets them right off. To let it go smooth on download servers, manufacturers roll out OTA updates only gradually to select regions and users and complete it over the course of up to one month. But of course, people like us don’t wait that long.
OTA updates can also be installed manually. Although manufacturers won’t give you this as a direct option, but users who receive the OTA updates often publicly share the .zip file of the update. That file is your ticket to install a OTA update manually.
So if you’ve the .zip file of the OTA update you wish to install, follow the instructions below to install it manually.

  1. Download and transfer the OTA update’s .zip file to your Android device’s internal storage (don’t put it inside any folder).
  1. Boot your device into recovery mode.
  1. └ Once in recovery mode, use Volume buttons to navigate up and down between options and Power button to select an option.
  1. Select the “Apply update” or “Apply update from phone storage” option.
  1. Select the OTA .zip file you transferred in Step 1 above. and install it.
  1. Once installation is finished, select reboot from recovery main menu.

Download Link :: Link
January 30, 2019

Oppo R1K Tested Flash File Free 100% Tested

Oppo R1K Tested Flash File Free 100% Tested

How to Install OTA Updates Manually using Recovery and ADB sideload

If there’s one thing that Android devices have had right for a very long time, then it’s the system of Over-The-Air a.k.a OTAupdates. This ensures that a user can get updates for his/her device directly on the phone without needing to connect phone to a PC. This feature was adopted by Apple for its iPhone later than Android.
However, the thing with OTA updates is that not everyone gets them right off. To let it go smooth on download servers, manufacturers roll out OTA updates only gradually to select regions and users and complete it over the course of up to one month. But of course, people like us don’t wait that long.
OTA updates can also be installed manually. Although manufacturers won’t give you this as a direct option, but users who receive the OTA updates often publicly share the .zip file of the update. That file is your ticket to install a OTA update manually.
So if you’ve the .zip file of the OTA update you wish to install, follow the instructions below to install it manually.

  1. Download and transfer the OTA update’s .zip file to your Android device’s internal storage (don’t put it inside any folder).
  1. Boot your device into recovery mode.
  1. └ Once in recovery mode, use Volume buttons to navigate up and down between options and Power button to select an option.
  1. Select the “Apply update” or “Apply update from phone storage” option.
  1. Select the OTA .zip file you transferred in Step 1 above. and install it.
  1. Once installation is finished, select reboot from recovery main menu.

Download Link :: Link
January 30, 2019

Oppo M7 PAC Flash File 1000% Tested Free Download

Oppo M7 PAC Flash File  1000% Tested  Free Download

How To Flash Oppo M7

Step 1: Download and extract QMobile i1 flash file on your Computer. After that, you will find SC7731 .pac Firmware inside the folder. Now open SPD Flash Tool and click on Load Packet button in Flash Tool then select the .pac Firmware file.
Step 2: Install SPD Android USB Driver on your Computer (skip it if the driver already installed). Now click on Start Downloading button in Flash Tool for begin the flashing process and connect your device to the Computer using USB cable by hold pressing Volume Up or Down button in power off mode.
Step 3: Wait until during the downloading process at this time don’t disconnect your device from Computer. It can take up to 5-10 minutes for completed. After done you will see a Passed message in Flash Tool.
Download Link :: Link
January 30, 2019

Oppo M3 Plus PAC Flash File 1000% Tested Free Download

Oppo M3 Plus PAC Flash File  1000% Tested  Free Download

How To Flash Oppo M3 Plus

Step 1: Download and extract QMobile i1 flash file on your Computer. After that, you will find SC7731 .pac Firmware inside the folder. Now open SPD Flash Tool and click on Load Packet button in Flash Tool then select the .pac Firmware file.
Step 2: Install SPD Android USB Driver on your Computer (skip it if the driver already installed). Now click on Start Downloading button in Flash Tool for begin the flashing process and connect your device to the Computer using USB cable by hold pressing Volume Up or Down button in power off mode.
Step 3: Wait until during the downloading process at this time don’t disconnect your device from Computer. It can take up to 5-10 minutes for completed. After done you will see a Passed message in Flash Tool.
Download Link :: Link
January 30, 2019

N920AUCU5ERB5 7.0 4File USA (AT&T) All Fix Dead Fix Tested Flash File Free 100% Working

N920AUCU5ERB5 7.0 4File USA (AT&T) All Fix Dead Fix Tested Flash File Free 100% Working

All Gsm Crcak Here Free :: Link

Follow these steps to enter Download Mode/Odin Mode
  1. Power off your device
  2. Press and hold Volume Down key, Home Key and Power Key
  3. When your device vibrates, release Power key while keep holding the Volume Down key and Homekey
  4. Press Volume Up key to enter Download mode, which has a green robot figure and “Downloading… Do not turn off target!!)
  5. You device should be automatically recognized by Odin. At the lower-left of Odin interface, it should show a message that says "Added!" and in the meantime you should see a light-blue box at the ID:COM section stating "COM:3" (the number depend on which USB port you have plugged the device cable and is irrelevant). Whether it is "PDA" or "AP" depends on the version of Odin that you used. But the md5 file goes to either "PDA" or "AP". After adding the file, click "Start" to begin the flashing process.
  6. WARNING DO NOT REMOVE OR OPERATE ON YOUR DEVICE UNTIL FINISHED OR FAILED IS SHOWED ON ODIN.
  7. When the flashing process is done and if everything goes well, you should see a big green box saying "RESET" or "PASSED" (depends on the version of Odin is used). By now, the device should be rebooted and it is safe to remove/unplug your device.
  8. Flash succeeded
Downlaoad Link :: Link
January 30, 2019

Qmobile S9 Stock Firmware Dead Fix Tested Flash File Free 100% Working

Qmobile S9 Stock Firmware Dead Fix Tested Flash File Free 100% Working

How To Flash –Qmobile S9

Perfectly Working You Must Need to Follow Below


  1. Download Latest version Flash Tools
  2. Extract On Your Computer( Any Drive)
  3. Download You Mobile Same Version Firmware
  4. Extract On Your Computer
  5. Install Your Phone USB Driver On Your Pc
  6. Now Open SP Flash Tools On Your Pc
  7. Load Scatter File Frome Extract Firmware Location
  8. Click Download And Update Button
  9. Now Connect Your Phone With Your PC USB Cable
  10. Your Phone Star Flashing Wait for 5/7 Minute
  11. When Complete Flashing Process Then You Green Ring Will Paper
  12. Now Complete Your Phone Updated
  13. Remove USB Cable & Enjoy Mobile Phone
  14. Don’t Forget Comment & Share Thank You
Warning Note: Fast Backup Your Phone Important Personal Data When Flash Your Phone Erase All Data File. So Please Fast Backup Data And Flashing Your Phone Own Risk.
Qmobile S9  Flash File


Following are the steps to perform in order to Flash Stock Rom or any other custom ROM using so called flash tool SP(Smart Phone) Flash Device on a windows computer. Before starting the process of flashing make sure that your smartphone device has at least 50 percent of battery.

  1. Extract the flash file in any folder on your computer or laptop device.
  2. Need to install SP Flash Tool, Driver and Instruction manual.
  3. Launch the SP Flash Tool and locates Scatter File Tool.
  4. Now, you need to connect your Qmobile S9  with the computer and make a connection.
  5. Now click on upgrade and just wait for some time (minutes).
  6. Once the process successfully completed you will get a green signal.


    We hope this article will help you in solving the problems related to Qmobile S9  Flash File. And if it helps to solve your problem don’t forget to share with your friends and share your views about it.
    Download Link :: Link

    Friday, January 25, 2019

    January 25, 2019

    Oppo R1001Tested Flash File Free 100% Tested

    Oppo R1001Tested Flash File Free 100% Tested

    How to Install OTA Updates Manually using Recovery and ADB sideload

    If there’s one thing that Android devices have had right for a very long time, then it’s the system of Over-The-Air a.k.a OTAupdates. This ensures that a user can get updates for his/her device directly on the phone without needing to connect phone to a PC. This feature was adopted by Apple for its iPhone later than Android.
    However, the thing with OTA updates is that not everyone gets them right off. To let it go smooth on download servers, manufacturers roll out OTA updates only gradually to select regions and users and complete it over the course of up to one month. But of course, people like us don’t wait that long.
    OTA updates can also be installed manually. Although manufacturers won’t give you this as a direct option, but users who receive the OTA updates often publicly share the .zip file of the update. That file is your ticket to install a OTA update manually.
    So if you’ve the .zip file of the OTA update you wish to install, follow the instructions below to install it manually.

    1. Download and transfer the OTA update’s .zip file to your Android device’s internal storage (don’t put it inside any folder).
    1. Boot your device into recovery mode.
    1. └ Once in recovery mode, use Volume buttons to navigate up and down between options and Power button to select an option.
    1. Select the “Apply update” or “Apply update from phone storage” option.
    1. Select the OTA .zip file you transferred in Step 1 above. and install it.
    1. Once installation is finished, select reboot from recovery main menu.

    Download Link :: Link
    January 25, 2019

    Oppo A71 CPH1717 Tested Flash File Free 100% Tested

    Oppo A71 CPH1717 Tested Flash File Free 100% Tested

    How to Install OTA Updates Manually using Recovery and ADB sideload

    If there’s one thing that Android devices have had right for a very long time, then it’s the system of Over-The-Air a.k.a OTAupdates. This ensures that a user can get updates for his/her device directly on the phone without needing to connect phone to a PC. This feature was adopted by Apple for its iPhone later than Android.
    However, the thing with OTA updates is that not everyone gets them right off. To let it go smooth on download servers, manufacturers roll out OTA updates only gradually to select regions and users and complete it over the course of up to one month. But of course, people like us don’t wait that long.
    OTA updates can also be installed manually. Although manufacturers won’t give you this as a direct option, but users who receive the OTA updates often publicly share the .zip file of the update. That file is your ticket to install a OTA update manually.
    So if you’ve the .zip file of the OTA update you wish to install, follow the instructions below to install it manually.
    1. Download and transfer the OTA update’s .zip file to your Android device’s internal storage (don’t put it inside any folder).
    2. Boot your device into recovery mode.
      └ Once in recovery mode, use Volume buttons to navigate up and down between options and Power button to select an option.
    3. Select the “Apply update” or “Apply update from phone storage” option.
    4. Select the OTA .zip file you transferred in Step 1 above. and install it.
    5. Once installation is finished, select reboot from recovery main menu.
    Download Link :: Link
    January 25, 2019

    Oppo A59s Stock Firmware Dead Fix Tested Flash File Free 100% Working

    Oppo A59s Stock Firmware Dead Fix Tested Flash File Free 100% Working

    How To Flash –Oppo A59s 

    Perfectly Working You Must Need to Follow Below


    1. Download Latest version Flash Tools
    2. Extract On Your Computer( Any Drive)
    3. Download You Mobile Same Version Firmware
    4. Extract On Your Computer
    5. Install Your Phone USB Driver On Your Pc
    6. Now Open SP Flash Tools On Your Pc
    7. Load Scatter File Frome Extract Firmware Location
    8. Click Download And Update Button
    9. Now Connect Your Phone With Your PC USB Cable
    10. Your Phone Star Flashing Wait for 5/7 Minute
    11. When Complete Flashing Process Then You Green Ring Will Paper
    12. Now Complete Your Phone Updated
    13. Remove USB Cable & Enjoy Mobile Phone
    14. Don’t Forget Comment & Share Thank You
    Warning Note: Fast Backup Your Phone Important Personal Data When Flash Your Phone Erase All Data File. So Please Fast Backup Data And Flashing Your Phone Own Risk.
    Oppo A59s Flash File


    Following are the steps to perform in order to Flash Stock Rom or any other custom ROM using so called flash tool SP(Smart Phone) Flash Device on a windows computer. Before starting the process of flashing make sure that your smartphone device has at least 50 percent of battery.

    1. Extract the flash file in any folder on your computer or laptop device.
    2. Need to install SP Flash Tool, Driver and Instruction manual.
    3. Launch the SP Flash Tool and locates Scatter File Tool.
    4. Now, you need to connect your Oppo A59s  with the computer and make a connection.
    5. Now click on upgrade and just wait for some time (minutes).
    6. Once the process successfully completed you will get a green signal.


      We hope this article will help you in solving the problems related to Oppo A59s Flash File. And if it helps to solve your problem don’t forget to share with your friends and share your views about it.
      Download Link :: Link
      January 25, 2019

      Oppo A53 Stock Firmware Dead Fix Tested Flash File Free 100% Working

      Oppo A53 Stock Firmware Dead Fix Tested Flash File Free 100% Working

      How To Flash

      1. Launch QFIL
      2. Connect the device to the PC while in EDL Mode (device should be in EDL before connecting to pc). No Port Available should change to Qualcomm HS-USB QDLoader 9008 
      3. Under Select Build Type, tick Flat Build
      4. Under Select Programmer, click Browse
      5. In the Window that pops up, highlight the loader file (usually named prog_emmc_firehose_****.mbn) and click Open
      6. Click Load XML
      7. In the Window that pops up, highlight the rawprogram() file then click Open
      8. Another Window will automatically pop up, highlight the patch() file then click Open
      9. Click Download
      10. QFIL should start flashing the firmware, Do Not interrupt
      11. You should get Download Succeed Finish Download once QFIL has successfully flashed the firmware. Disconnect the device and boot up
      Download Link :: Link
      January 25, 2019

      Oppo A37M Stock Firmware Dead Fix Tested Flash File Free 100% Working

      Oppo A37M Stock Firmware Dead Fix Tested Flash File Free 100% Working

      How To Flash –Oppo A37M 

      Perfectly Working You Must Need to Follow Below


      1. Download Latest version Flash Tools
      2. Extract On Your Computer( Any Drive)
      3. Download You Mobile Same Version Firmware
      4. Extract On Your Computer
      5. Install Your Phone USB Driver On Your Pc
      6. Now Open SP Flash Tools On Your Pc
      7. Load Scatter File Frome Extract Firmware Location
      8. Click Download And Update Button
      9. Now Connect Your Phone With Your PC USB Cable
      10. Your Phone Star Flashing Wait for 5/7 Minute
      11. When Complete Flashing Process Then You Green Ring Will Paper
      12. Now Complete Your Phone Updated
      13. Remove USB Cable & Enjoy Mobile Phone
      14. Don’t Forget Comment & Share Thank You
      Warning Note: Fast Backup Your Phone Important Personal Data When Flash Your Phone Erase All Data File. So Please Fast Backup Data And Flashing Your Phone Own Risk.
      Oppo A37M  Flash File


      Following are the steps to perform in order to Flash Stock Rom or any other custom ROM using so called flash tool SP(Smart Phone) Flash Device on a windows computer. Before starting the process of flashing make sure that your smartphone device has at least 50 percent of battery.

      1. Extract the flash file in any folder on your computer or laptop device.
      2. Need to install SP Flash Tool, Driver and Instruction manual.
      3. Launch the SP Flash Tool and locates Scatter File Tool.
      4. Now, you need to connect your Oppo A37M  with the computer and make a connection.
      5. Now click on upgrade and just wait for some time (minutes).
      6. Once the process successfully completed you will get a green signal.


        We hope this article will help you in solving the problems related to Oppo A37M  Flash File. And if it helps to solve your problem don’t forget to share with your friends and share your views about it.
        Download Link :: Link
        January 25, 2019

        Oppo A37 Dead Fix Tested Flash File Free 100% Working

        Oppo A37 Dead Fix Tested Flash File Free 100% Working

        Flashing By CM2QLM And QPST QFIL Qualcomm Flash Tool
        No Dead Risk Dead Fix Virus Clear Hang On Logo Fix
        Password Pattern Pin All Lock Remove Done

        How To Use QFIL


        1. Launch QFIL
        2. Connect the device to the PC while in EDL Mode (device should be in EDL before connecting to pc). No Port Available should change to Qualcomm HS-USB QDLoader 9008 
        3. Under Select Build Type, tick Flat Build
        4. Under Select Programmer, click Browse
        5. In the Window that pops up, highlight the loader file (usually named prog_emmc_firehose_****.mbn) and click Open
        6. Click Load XML
        7. In the Window that pops up, highlight the rawprogram() file then click Open
        8. Another Window will automatically pop up, highlight the patch() file then click Open
        9. Click Download
        10. QFIL should start flashing the firmware, Do Not interrupt
        11. You should get Download Succeed Finish Download once QFIL has successfully flashed the firmware. Disconnect the device and boot up
        Download Link :: Link
        January 25, 2019

        Oppo A31t Tested Flash File Free 100% Tested

        Oppo A31t Tested Flash File Free 100% Tested

        How to Install OTA Updates Manually using Recovery and ADB sideload

        If there’s one thing that Android devices have had right for a very long time, then it’s the system of Over-The-Air a.k.a OTAupdates. This ensures that a user can get updates for his/her device directly on the phone without needing to connect phone to a PC. This feature was adopted by Apple for its iPhone later than Android.
        However, the thing with OTA updates is that not everyone gets them right off. To let it go smooth on download servers, manufacturers roll out OTA updates only gradually to select regions and users and complete it over the course of up to one month. But of course, people like us don’t wait that long.
        OTA updates can also be installed manually. Although manufacturers won’t give you this as a direct option, but users who receive the OTA updates often publicly share the .zip file of the update. That file is your ticket to install a OTA update manually.
        So if you’ve the .zip file of the OTA update you wish to install, follow the instructions below to install it manually.
        1. Download and transfer the OTA update’s .zip file to your Android device’s internal storage (don’t put it inside any folder).
        2. Boot your device into recovery mode.
          └ Once in recovery mode, use Volume buttons to navigate up and down between options and Power button to select an option.
        3. Select the “Apply update” or “Apply update from phone storage” option.
        4. Select the OTA .zip file you transferred in Step 1 above. and install it.
        5. Once installation is finished, select reboot from recovery main menu.
        Download Link :: Link
        January 25, 2019

        Oppo 1105 Stock Firmware Dead Fix Tested Flash File Free 100% Working

        Oppo 1105 Stock Firmware Dead Fix Tested Flash File Free 100% Working

        How To Flash 

        1. Launch QFIL
        2. Connect the device to the PC while in EDL Mode (device should be in EDL before connecting to pc). No Port Available should change to Qualcomm HS-USB QDLoader 9008 
        3. Under Select Build Type, tick Flat Build
        4. Under Select Programmer, click Browse
        5. In the Window that pops up, highlight the loader file (usually named prog_emmc_firehose_****.mbn) and click Open
        6. Click Load XML
        7. In the Window that pops up, highlight the rawprogram() file then click Open
        8. Another Window will automatically pop up, highlight the patch() file then click Open
        9. Click Download
        10. QFIL should start flashing the firmware, Do Not interrupt
        11. You should get Download Succeed Finish Download once QFIL has successfully flashed the firmware. Disconnect the device and boot up
        Download Link :: Link
        January 25, 2019

        Oppo 1100 Stock Firmware Dead Fix Tested Flash File Free 100% Working

        Oppo 1100 Stock Firmware Dead Fix Tested Flash File Free 100% Working

                                               

        How To Flash Oppo 1100

        1. Launch QFIL
        2. Connect the device to the PC while in EDL Mode (device should be in EDL before connecting to pc). No Port Available should change to Qualcomm HS-USB QDLoader 9008 
        3. Under Select Build Type, tick Flat Build
        4. Under Select Programmer, click Browse
        5. In the Window that pops up, highlight the loader file (usually named prog_emmc_firehose_****.mbn) and click Open
        6. Click Load XML
        7. In the Window that pops up, highlight the rawprogram() file then click Open
        8. Another Window will automatically pop up, highlight the patch() file then click Open
        9. Click Download
        10. QFIL should start flashing the firmware, Do Not interrupt
        11. You should get Download Succeed Finish Download once QFIL has successfully flashed the firmware. Disconnect the device and boot up
        Download Link :: Link
        January 25, 2019

        Qmobile S8 Stock Firmware Dead Fix Tested Flash File Free 100% Working

        Qmobile S8 Stock Firmware Dead Fix Tested Flash File Free 100% Working

        How To Flash –Qmobile S8 

        Perfectly Working You Must Need to Follow Below


        1. Download Latest version Flash Tools
        2. Extract On Your Computer( Any Drive)
        3. Download You Mobile Same Version Firmware
        4. Extract On Your Computer
        5. Install Your Phone USB Driver On Your Pc
        6. Now Open SP Flash Tools On Your Pc
        7. Load Scatter File Frome Extract Firmware Location
        8. Click Download And Update Button
        9. Now Connect Your Phone With Your PC USB Cable
        10. Your Phone Star Flashing Wait for 5/7 Minute
        11. When Complete Flashing Process Then You Green Ring Will Paper
        12. Now Complete Your Phone Updated
        13. Remove USB Cable & Enjoy Mobile Phone
        14. Don’t Forget Comment & Share Thank You
        Warning Note: Fast Backup Your Phone Important Personal Data When Flash Your Phone Erase All Data File. So Please Fast Backup Data And Flashing Your Phone Own Risk.
        Qmobile S8  Flash File


        Following are the steps to perform in order to Flash Stock Rom or any other custom ROM using so called flash tool SP(Smart Phone) Flash Device on a windows computer. Before starting the process of flashing make sure that your smartphone device has at least 50 percent of battery.

        1. Extract the flash file in any folder on your computer or laptop device.
        2. Need to install SP Flash Tool, Driver and Instruction manual.
        3. Launch the SP Flash Tool and locates Scatter File Tool.
        4. Now, you need to connect your Qmobile S8  with the computer and make a connection.
        5. Now click on upgrade and just wait for some time (minutes).
        6. Once the process successfully completed you will get a green signal.


          We hope this article will help you in solving the problems related to Qmobile S8  Flash File. And if it helps to solve your problem don’t forget to share with your friends and share your views about it.
          Download Link :: Link

          Thursday, January 24, 2019

          January 24, 2019

          Samsung GT-I9001 Remove Pattern And Password Without Data Loss File Flash Only Odin 100% Working

          Samsung GT-I9001 Remove Pattern And Password Without Data Loss File Flash Only Odin 100% Working

          All Gsm Crcak Here Free :: Link

          Follow these steps to enter Download Mode/Odin Mode
          1. Power off your device
          2. Press and hold Volume Down key, Home Key and Power Key
          3. When your device vibrates, release Power key while keep holding the Volume Down key and Homekey
          4. Press Volume Up key to enter Download mode, which has a green robot figure and “Downloading… Do not turn off target!!)
          5. You device should be automatically recognized by Odin. At the lower-left of Odin interface, it should show a message that says "Added!" and in the meantime you should see a light-blue box at the ID:COM section stating "COM:3" (the number depend on which USB port you have plugged the device cable and is irrelevant). Whether it is "PDA" or "AP" depends on the version of Odin that you used. But the md5 file goes to either "PDA" or "Boot.img". After adding the file, click "Start" to begin the flashing process.
          6. WARNING DO NOT REMOVE OR OPERATE ON YOUR DEVICE UNTIL FINISHED OR FAILED IS SHOWED ON ODIN.
          7. When the flashing process is done and if everything goes well, you should see a big green box saying "RESET" or "PASSED" (depends on the version of Odin is used). By now, the device should be rebooted and it is safe to remove/unplug your device.
          8. Flash succeeded
          Downlaoad Link :: Link
          January 24, 2019

          QMobile QTab V2 (2018) Dead Fix Tested Flash File Free 100% Working

          QMobile QTab V2 (2018) Dead Fix Tested Flash File Free 100% Working

          Complete Guide to Install QMobile QTab V2 (2018)

          Following are the steps to perform in order to Flash Stock Rom or any other custom ROM using so called flash tool SP(Smart Phone) Flash Device on a windows computer. Before starting the process of flashing make sure that your smartphone device has at least 50 percent of battery.
          1. Extract the flash file in any folder on your computer or laptop device.
          2. Need to install SP Flash Tool, Driver and Instruction manual.
          3. Launch the SP Flash Tool and locates Cfg.
          4. Now, you need to connect your QMobile QTab V2 (2018) with the computer and make a connection.
          5. Now click on upgrade and just wait for some time (minutes).
          6. Once the process successfully completed you will get a green signal.
            We hope this article will help you in solving the problems related to QMobile QTab V2 (2018) Flash File. And if it helps to solve your problem don’t forget to share with your friends and share your views about it.
            Download Link :: Link